为自动化测试与硬件研发打造。逐路开关电源与 USB 数据线、每路电压/电流测量、普通/互锁模式、断电状态恢复——USB CDC 免驱动，即插即用。Built for test automation and hardware R&D. Per-port power and USB data-line switching, per-channel voltage/current measurement, normal/interlock modes, power-loss state recovery — driverless over USB CDC.
从紧凑的 4 路到大功率 7 路，覆盖从单工位到自动化测试台的需求。From the compact 4-channel to the high-power 7-channel — single bench to full test rig.
紧凑外形。每路标配电压/电流测量，单路最高 4A，自恢复保险丝过流保护。Compact form factor. Per-channel voltage/current measurement standard, up to 4A per port, self-recovery fuse protection.
专为测试自动化设计。7 路独立控制，16A 总输出；ADV 版增加 100Hz 电压/电流测量、过流事件监控与 OTA 升级。Built for test automation. 7 independent channels, 16A total output; the ADV version adds 100Hz V/I measurement, overcurrent event monitoring and OTA updates.
独立开关每个端口供电，软件模拟插拔。Switch each port's power independently — simulate plug/unplug in software.
独立通断 USB 2.0 D+/D−，电源与数据分离。Cut or connect the D+/D− lines, separate from power.
逐路 100Hz 采样，流式输出，过流回调。Per-channel 100Hz sampling, streamed, with overcurrent callbacks.
USB CDC，三大平台即插即用。USB CDC — plug-and-play on Windows, macOS, Linux.
多通道并行，或同一时刻只允许一路开启。Run channels in parallel, or allow only one port on at a time.
可配上电默认状态，断电后自动恢复断电前通道状态。Configurable power-on defaults; restores the previous channel state after power loss.
硬件过流保护；7CH ADV 支持过流事件上报。Hardware overcurrent protection; the 7CH ADV reports overcurrent events.
每台可设独立地址，支持大规模多 Hub 部署。Assign each hub a unique address for large multi-hub deployments.
从消费电子到自动驾驶，从全球头部手机厂商到高性能芯片公司，SmartUSBHub 已广泛部署于顶级企业的研发、自动化测试与生产验证流程。From consumer electronics to autonomous driving, from leading smartphone makers to high-performance chip companies, SmartUSBHub is deployed across the R&D, automated test and production-validation flows of top-tier enterprises.
在标准 USB 集线器"始终在线"不够用的地方，用软件接管每个端口。Where an always-on USB hub falls short, take software control of every port.
脚本化控制 USB 枚举顺序，远程模拟插拔以复位卡死设备或触发 bootloader；实时电压/电流监控帮助定位掉电与异常电流。Script USB enumeration order, remotely simulate plug/unplug to reset hung targets or trigger bootloader mode, and trace power loss or abnormal current with live V/I monitoring.
反复通断电源与数据线，模拟插拔与掉电以验证固件鲁棒性；逐路功耗记录可与测试用例关联，全程无需人工干预。Toggle power and data lines repeatedly to stress-test firmware resilience, and log per-port power profiles alongside test cases — no physical intervention needed.
软件控制多 DUT 并行测试，自动化固件刷写与远程上下电；逐路电流监控可实时标记短路与过流，隔离不良单元。Test multiple DUTs in parallel under software control, automate firmware flashing and remote power-cycling, and flag shorts or overcurrent per port in real time.
对加密狗、UKey 等敏感外设做物理层授权与隔离；在会议室、数据中心集中切换摄像头、KVM 等设备，满足合规与可审计需求。Apply physical-layer authorization to dongles and security tokens, and centrally switch cameras or KVMs in shared spaces — meeting compliance and auditability needs.
SmartUSBHub Pro 7CH ADV 为每个端口内置 13 位高性能采集芯片，实现高精度电压/电流采集并连续数据流实时输出——把每条 USB 通道变成一台逐路功率分析仪。用于功耗记录、异常电流识别、过流事件捕获与长时间自动化监控。The SmartUSBHub Pro 7CH ADV builds a 13-bit high-performance acquisition chip into every port for high-accuracy voltage/current sensing, streamed continuously — turning each USB channel into a per-port power analyzer. Use it for power profiling, abnormal-current detection, overcurrent event capture and long-running automated monitoring.
桌面控制软件，逐路开关端口、实时查看电压与电流，无需写一行代码。Windows / macOS / Linux 免驱动即插即用。Desktop control software — toggle ports and watch live voltage / current, no code required. Driverless on Windows, macOS, Linux.
开源 Python 库，几行代码即可控制电源、数据线并读取测量值，轻松接入自动化测试流程。Open-source Python library — control power, data lines and read measurements in a few lines, straight into your test automation.
需要定制规格或批量采购？我们的团队随时为你服务。Need custom specs or volume orders? Our team is here to help.
采购咨询Contact Sales